In that regard, we are already engaging our suppliers to begin working on and developing plans to address and mitigate, to the extent possible, the potential impact of the proposed tariffs on the materials and components that they supply to Pelco.

As we are working with our suppliers, it is critical that we proactively collaborate with you and your team to identify and evaluate potential measures to mitigate the impact of the proposed tariffs on our respective businesses.

We would like to meet/discuss with you and your team if possible, to discuss the situation and our strategies, options, and mutually beneficial plans to address this situation.

We appreciate your time and understanding in this uncertain situation.

The post 2025 Tariff Impact Mitigation Strategies appeared first on Pelco Pulse.

Available in various sizes, pins and sockets for hard-to-reach places, each connector is insulated to insure accurate and reliable testing.  Even in the tightest spaces, Flexcon connectors provide accessibility without damaging pins.  Flexcon connectors are durable and easy to use, each test connector is good for up to 50 bends with induction solder, not crimped.  We offer three hookup options: permeant hookup by capturing the wire down the barrel; in the side, capturing the wire with a screw in the barrel; or in the barrel itself through an interchangeable converter on a Banana Plug that allows you to change sizes quickly and easily.

Flexcon connectors have been in use for over 50 years and are NASA approved. In fact, Flexcon connectors have been a part of many manned and unmanned space flights. Flexcon test connectors can be found in use with many leading commercial airlines as well as missile testing and other military applications.

FLEXCON SPECIFICATIONS:

• Pin and socket sizes 22, 20, 16, 12 and 8 conform to MIL Spec dimensions
• Heavy silver and/or gold contact plating
• Bi-axial lead attachment feature provides four methods of connection:
  • Barrel lead entrance with set screw in side.
  • Side lead entrance with set screw in barrel.
  • Banana plug terminated test lead plugs into .161 I. D. FLEXCON receptacle.
  • Combination of 2 and 3 for multiple pick-off signals and voltages.

FLEXCON USAGE:

• FLEXCON shaft bends when subjected to accidental side loads during plug-in to prevent mating connector contact and/or insert damage.
• Easy adjacent contact plug-in by bending FLEXCON’s shaft.
• Completely insulated for “live circuit” testing. Safe adjacent contact plug-in even with power ON.
• Pin contact FLEXCONS can be used as test gauges for checking corresponding size socket contact’s relative retention quality.
• Probe 8-pin and 11-pin relay sockets with 590-12P and 590-12S.
• Probe 7 or 9-pin miniature sockets and tubes with 620-20P and 620-20S.
• Use 590-16S for .045 or .062, 620-20S for .036 and 620-22S for .025 wire wrapped terminal test connectors.

Click here to learn more about Flexcon socket type test connectors. 

Click here to learn more about Flexcon pin type test connectors. 

Click here to visit the Flexcon website. 

The divisions of Pelco Component Technologies

Across the US and around the world, OEMs, engineers and product designers choose components from Pelco Component Technologies to control electricity and make things happen at the right time. We call it Putting Power to Work.

Sign up for Flexcon Email
Call 800-321-9539
Send us an email
Pelco website 

The post Featured Products: Flexcon Test Connectors appeared first on Pelco Pulse.

The Peltec 102 Dual Time Adjust Repeat Cycle Timer is used widely in automated watering systems for a lot of the crops in our nation’s heartland.  The 102 repeat cycle timer is used in their systems to dispense pesticides into the spraying nozzles.  The 102 will turn on a solenoid for 10 seconds every hour to dispense the pesticides.

With Dual Time Adjust Repeat Cycle Timers at the end of the “Off” cycle the load is energized, the timer returns to the “On” cycle and the cycling is repeated as long as input voltage is applied.

Peltec 100 Series DIN Rail Timers are available in a wide variety of single and multiple timing modes including Delay on Make, Delay on Break, Recycle, True Off Delay, Multifunction and Star Delta. Timing ranges from 0.1 second up to 100 days. LED indicators for input and output. Coarse and fine time settings by rotary switch and potentiometer. These timers have UL and CE approvals and are RoHS compliant. DIN Rail case design ensures easy installation.

DUAL TIME ADJUST REPEAT CYCLE FEATURES:

• Dual Time Adjust Repeat Cycle Timer
• 2 Timing modes: 1 – On Time first (On/Off Delay); 2 – Off Time first (Off/On Delay) n Timing mode choice by an external jumper
• Time range 0.1 second – 100 days. 10 time ranges available
• Time adjustments by rotary switches and potentiometer
• Relay output form: SPDT – 16 Amps
• Output indicator: red LED
• DIN rail mounting
• UL and CE approvals, RoHS compliant

TIMING MODES:

REPEAT CYCLE also called Recycle Timer, Recycling Timer, Flasher 

Repeat Cycle On/Off Delay :: Application of power to the input voltage terminals starts the “On” delay cycle. At the end of the “On” delay period, the load is de-energized and the “Off” delay starts. At the end of the “Off” cycle the load is energized, the timer returns to the “On” cycle and the cycling is repeated as long as input voltage is applied. Removal of input voltage will reset the timer to its pre-power condition.

Repeat Cycle Off/On Delay :: Application of power to the input voltage terminals starts the “Off” delay cycle. At the end of the “Off” delay period, the load is energized and the “On” delay starts. At the end of the “On” cycle, the load is de-energized, the timer returns to the “Off” cycle and the cycling is repeated as long as input voltage is applied. Removal of input voltage will reset the timer to its pre-power condition.

Click here to learn more about Peltec Relay and Digital Timers. 

The divisions of Pelco Component Technologies

Across the US and around the world, OEMs, engineers and product designers choose components from Pelco Component Technologies to control electricity and make things happen at the right time. We call it Putting Power to Work.

Sign up for Peltec Email
Call 800-321-9539
Send us an email
Pelco website 

The post Featured Product: Peltec 102 appeared first on Pelco Pulse.

FThe Pelco 182 timer is applied in various commercial and industrial kitchen applications. In a busy and hot environment under hood ventilation offers a consistent air turn over to provide a safe working environment, the Peltec 182 timer is interictal in maintaining the proper sequence. Likewise, a reliable fire suppression system is a life saving requirement. In the event of a power failure the Pelco 182 timer will keep the system active for a set period of time, thus allowing the system to do its job.

With True Off Delay Timers once the application of input voltage is applied, the output is energized. When the input voltage is removed, the time delay begins. At the end of this time delay, the output is de-energized. Input voltage must be applied for a minimum of 0.1 seconds to assure proper operation. Any application of the input voltage during the time delay will prompt a reset. No external trigger is required.

TRUE OFF DELAY/DELAY ON MAKE TIMER FEATURES:

• True Off Delay/Delay On Make Timer
• 2 Timing modes adjustable via rotary switch
• Relay output form: DPDT – 8 Amps
• Output indicator: Red LED
• Input indicator: Green LED
• DIN rail mounting
• 0.1 second–10 minutes time range
• UL and CE approvals, RoHS compliant

TIMING MODES:

a – True Off Delay :: Application of the supply voltage energizes the output relay. The timing period begins upon removal of the supply voltage. At the conclusion of the timing period, the output relay is de-energized. Reapplication of input voltage before the delay expires resets the time period.

e – Delay on Make :: Application of power to the timer input voltage terminals starts the time delay cycle. At the end of the preset delay, the output transfers until it is reset by interrupting the input voltage.

Click here to learn more about Peltec Relay and Digital Timers. 

Click here for the Peltec 182 datasheet. 

The divisions of Pelco Component Technologies

Across the US and around the world, OEMs, engineers and product designers choose components from Pelco Component Technologies to control electricity and make things happen at the right time. We call it Putting Power to Work.

Sign up for Peltec Email
Call 800-321-9539
Send us an email
Pelco website 

The post Featured Product: Peltec 182 Timer appeared first on Pelco Pulse.

We will be displaying a wide variety of parts that showcase our manufacturing capabilities and services. Our representatives will be there to answer any questions and to review any upcoming projects that you might be working on.

The Design-2-Part Show is the region’s largest design & contract manufacturing show. The show features exhibiting companies covering more than 300 manufacturing and service categories for the metals, plastics, rubber, and electronics industries.

We look forward to seeing you at the show.

Access your VIP invitation: click here.

The post Design-2-Part Trade Show, September 27th & 28th appeared first on Pelco Pulse.

For motors used to shake filters, check out the Airotronics Repeat Cycle timers. The motor is turned on when an input voltage is applied and the “On” time begins. At the end of the “On” time delay, the load is de-energized and the “Off” time delay begins and turns off the motor.  The “On” and “Off” times set by the user will determine the length of time the filter is shaken..

TGKAD Repeat Cycle Timer

TGKAD series Cube Relay Repeat Cycle (Dual Adjustable) On/Off timers are a unique combination of solid state timing circuitry with a relay output in a compact cube configuration.

The time delay for both the “On” cycle and the “Off” cycle can be individually adjusted.

These timers offer the many advantages of a relay output and provide the same functional performance as plug-in relay timers, but at a significant cost savings.

CUBE RELAY, 10-30 AMPS, DUAL ADJUSTABLE:

• High current-carrying capacity up to 30 amps
• 100% Load isolation
• No leakage in N.O. position
• No heat sinking required
• Available in any time delay periods required
• Digital CMOS timing
• Transient protected
• No minimum load required

TIMING MODE:
Application of input voltage to the timer starts the “On” time and energizes the relay

At the end of the “On” time delay, the relay is de-energized, and the “Off” time delay starts.

At the end of the “Off” time delay, the load is again energized, the timer returns to the “On” time delay, and the cycling continues as long as input voltage is applied.

Removal of the input voltage resets the timer.

Click here to learn more about Airotronics Repeat Cycle timers. 

Click here for the TGKAD datasheet. 

The divisions of Pelco Component Technologies

Across the US and around the world, OEMs, engineers and product designers choose components from Pelco Component Technologies to control electricity and make things happen at the right time. We call it Putting Power to Work.

Sign up for Airotronics Email
Call 800-321-9539
Send us an email
Pelco website 

The post Featured Product: TGKAD Repeat Cycle Timer appeared first on Pelco Pulse.

TH3L timers are solid state output units with digital timing. The TH3L comes in a 2″ square case. Ease of installation and hook-up is a primary design benefit. All models with integral time adjustment knob or factory-fixed time require only three connections. Units with external time adjustment have two additional terminals for the resistor or potentiometer.

TH3L Interval On Timer

Putting Power to Work with the TH3L
If your system includes an indicator that serves as a warning to the user, the Airotronics Interval On Delay timers are a great solution. When an operation within your system reaches a threshold that requires a change, it triggers the input voltage to the timer and starts the delay at which time a warning sound repeats until the set time for the delay expires.

INTERVAL ON SOLID STATE TIMER:

• Digital timing, solid state output
• 1 Amp current load handling
• 10 Amps single AC cycle surge handling
• 3 Operating voltages: 24, 120 and 230 VAC
• ±0.1% Repeat accuracy
• Virtually unlimited time ranges
• Factory-fixed or variable timing adjustment
• O-ring sealed exposed controls

Timing Mode
Application of input voltage to the timer energizes the load and starts the time delay. At the end of the time delay, the load is de-energized. Removal and re-application of input voltage resets the timer.

 Click here to learn more about Airotronics Interval On timers. 

Click here for the TH3L datasheet. 

The divisions of Pelco Component Technologies

Across the US and around the world, OEMs, engineers and product designers choose components from Pelco Component Technologies to control electricity and make things happen at the right time. We call it Putting Power to Work.

Sign up for Airotronics Email
Call 855-227-3526
Send us an email
Pelco website 

The post Product Spotlight: TH3L Interval On timer appeared first on Pelco Pulse.

Electroline Sales, Inc. is a skilled manufacturer’s rep firm promoting Pelco Component Technologies while working as advocates for our customers. Their ability to specialize in electronic and electro-mechanical products is synergistic with our customer base. We work with them to serve our customers in Minnesota, Wisconsin, South Dakota, North Dakota and Northern Illinois.

Pictured are Pete McKnight (RSM, Pelco Component Technologies), Kim Osthoff (Administrative Assistant, Electroline Sales), Tim Smith (President, Electroline Sales), Steve Simon (Sales Engineer, Electroline Sales), and Scott Weber ( Sales, Electroline Sales)

Tim is responsible for Minnesota, North Dakota, and South Dakota while Scott Weber covers Wisconsin and we work with Steve Simon in Northern Illinois.

Together we are Putting Power to Work. Learn more at: pelcocaz.com

The post Meet Our Team appeared first on Pelco Pulse.

The MC series Coin Counting Timers combine a Single Shot timing mode and coin counting capability with microprocessor technology for reliability and accuracy.

Two 4-position binary dipswitches allow users to select the number of coins as well as the time period. The switches can accommodate from 1 to 15 coins and accurately set time periods from .5 to 7.5 minutes with excellent repeatability.

Options include an accumulation function, a last-coin alarm or an output to a coin counter. When required, the unit can be supplied with a fixed factory-set coin count or time period.

MC series coin counters come complete with a relay capable of switching loads up to 20 amps, 1.5HP. The electronic components are encapsulated in a 2.5″ square package for protection from the elements.

MC Series Coin Counter

Single Shot Relay Output Microcontroller Counter Timer:

• Coin-counting timer
• Counts 1 to 15 coins and .5 to 7.5 minutes
• Microprocessor-controlled
• 15 to 20 amp relay output

Airotronics Single Shot Timers: The term “Single Shot” signifies a single pulse output of some duration. Single Shot on Make: Power must be applied to the input voltage terminals continuously. Upon closure of a Normally Open (N.O.) external initiate switch, the load is instantaneously energized and the time delay cycle starts. Maintained closure or actuation of the external initiate switch during the delay cycle will not affect the time delay period. When the delay period expires, the timer will reset to its original position and is ready for another cycle. Single Shot on Break: Power must be applied to the input voltage terminals continuously. Upon closing and opening an external initiate switch, the load is instantaneously energized and the time delay cycle starts. When the delay period expires, the timer will reset to its original position and is ready for another cycle.

Timing Mode:  Input voltage is applied continuously. After the correct amount of coins has been counted by the timer, the relay will energize for the selected time period. The unit will automatically reset, after the selected time period expires and is ready for another cycle.

Click here to learn more about the Airotronics Single Shot Timers

Click here for the MC datasheet

The divisions of Pelco Component Technologies
Across the US and around the world, OEMs, engineers and product designers choose components from Pelco Component Technologies to control electricity and make things happen at the right time. We call it Putting Power to Work.

Sign up for PelcoPulse Email
Call 855-227-3526
Send us an email
Pelco Website

The post Product Spotlight: MC Single Shot Relay Output Microcontroller Counter Timer appeared first on Pelco Pulse.

TGPL series Cube Relay Single Shot On Make timers are a unique combination of digital CMOS timing circuitry with a relay output in a compact 2 x 2 configuration. These units provide the same functional performance as plug-in relay timers, but at significant cost savings. Key features: Uses a live or hot initiate switch; relay common is totally isolated

Single Shot Timer TGPL

Putting Power to Work with the TGPL: 

For commercial ice makers that need constant replenishing, use Airotronics Single Shot timers with a relay.  Upon closure of a normally open external initiate switch, the load is instantaneously energized and releases the ice into the bin to be dispensed.  The delay starts over once the switch is open and the cycle repeats the next time the switch is closed.

SINGLE SHOT, ONE SHOT RELAY TIMER:

• High current-carrying capacity up to 30 amps
• Transient protected
• 100% Load isolation
• No leakage in N.O. position
• No heat sinking required
• Available in any time delay period required
• Digital CMOS timing
• No minimum load required

Wiring and dimensions of Single Shot Timer-TGPL

Timing Mode:  Power must be applied to the input voltage terminals continuously. Upon closure of a Normally Open (N.O.) external initiate switch, the load is instantaneously energized and the time delay cycle starts. Maintained closure or actuation of the external initiate switch during the delay cycle will not affect the time delay period. When the delay period expires, the timer will reset to its original position and the timer is ready for another cycle.

Click here to learn more about Single Shot timers. 

Click here for the single shot datasheet.

The divisions of Pelco Component Technologies

Across the US and around the world, OEMs, engineers and product designers choose components from Pelco Component Technologies to control electricity and make things happen at the right time. We call it Putting Power to Work.

Sign up for PelcoPulse Email
Call 855-227-3526
Send us an email
Pelco website 

The post TGPL Single Shot appeared first on Pelco Pulse.