TGPL Single Shot

TGPL Single Shot

TGPL Single Shot for commercial ice makers:

TGPL series Cube Relay Single Shot On Make timers are a unique combination of digital CMOS timing circuitry with a relay output in a compact 2 x 2 configuration. These units provide the same functional performance as plug-in relay timers, but at significant cost savings. Key features: Uses a live or hot initiate switch; relay common is totally isolated

Single Shot Timer TGPL

Single Shot Timer TGPL

Putting Power to Work with the TGPL: 

For commercial ice makers that need constant replenishing, use Airotronics Single Shot timers with a relay.  Upon closure of a normally open external initiate switch, the load is instantaneously energized and releases the ice into the bin to be dispensed.  The delay starts over once the switch is open and the cycle repeats the next time the switch is closed.

SINGLE SHOT, ONE SHOT RELAY TIMER:

  • High current-carrying capacity up to 30 amps
  • Transient protected
  • 100% Load isolation
  • No leakage in N.O. position
  • No heat sinking required
  • Available in any time delay period required
  • Digital CMOS timing
  • No minimum load required
Wiring and dimensions of  Single Shot Timer-TGPL

Wiring and dimensions of Single Shot Timer-TGPL

Timing Mode:  Power must be applied to the input voltage terminals continuously. Upon closure of a Normally Open (N.O.) external initiate switch, the load is instantaneously energized and the time delay cycle starts. Maintained closure or actuation of the external initiate switch during the delay cycle will not affect the time delay period. When the delay period expires, the timer will reset to its original position and the timer is ready for another cycle.

Click here to learn more about Single Shot timers. 

Click here for the single shot datasheet.

The divisions of Pelco Component Technologies

Across the US and around the world, OEMs, engineers and product designers choose components from Pelco Component Technologies to control electricity and make things happen at the right time. We call it Putting Power to Work.

Sign up for PelcoPulse Email
Call 855-227-3526
Send us an email
Pelco website 

 

Next Post:
Previous Post:
This article was written by