Pelmax wire harness and cable assembly capabilities include low volume…
Product Spotlight: MC Single Shot Relay Output Microcontroller Counter Timer
Putting Power to Work with the MC Series Coin Counter
The MC series Coin Counting Timers combine a Single Shot timing mode and coin counting capability with microprocessor technology for reliability and accuracy.
Two 4-position binary dipswitches allow users to select the number of coins as well as the time period. The switches can accommodate from 1 to 15 coins and accurately set time periods from .5 to 7.5 minutes with excellent repeatability.
Options include an accumulation function, a last-coin alarm or an output to a coin counter. When required, the unit can be supplied with a fixed factory-set coin count or time period.
MC series coin counters come complete with a relay capable of switching loads up to 20 amps, 1.5HP. The electronic components are encapsulated in a 2.5″ square package for protection from the elements.
Single Shot Relay Output Microcontroller Counter Timer:
- Coin-counting timer
- Counts 1 to 15 coins and .5 to 7.5 minutes
- Microprocessor-controlled
- 15 to 20 amp relay output
Airotronics Single Shot Timers: The term “Single Shot” signifies a single pulse output of some duration. Single Shot on Make: Power must be applied to the input voltage terminals continuously. Upon closure of a Normally Open (N.O.) external initiate switch, the load is instantaneously energized and the time delay cycle starts. Maintained closure or actuation of the external initiate switch during the delay cycle will not affect the time delay period. When the delay period expires, the timer will reset to its original position and is ready for another cycle. Single Shot on Break: Power must be applied to the input voltage terminals continuously. Upon closing and opening an external initiate switch, the load is instantaneously energized and the time delay cycle starts. When the delay period expires, the timer will reset to its original position and is ready for another cycle.
Timing Mode: Input voltage is applied continuously. After the correct amount of coins has been counted by the timer, the relay will energize for the selected time period. The unit will automatically reset, after the selected time period expires and is ready for another cycle.
Click here to learn more about the Airotronics Single Shot Timers
Click here for the MC datasheet
The divisions of Pelco Component Technologies
Across the US and around the world, OEMs, engineers and product designers choose components from Pelco Component Technologies to control electricity and make things happen at the right time. We call it Putting Power to Work.
Sign up for PelcoPulse Email
Call 855-227-3526
Send us an email
Pelco Website